Wikidata:Property proposal/Moisture absorption
Jump to navigation
Jump to search
moisture absorption[edit]
Originally proposed at Wikidata:Property proposal/Natural science
| Description | quantity of moisture a material would absorb in given conditions. |
|---|---|
| Represents | material (Q214609) > mechanical property (Q5725005) > moisture (Q217651) |
| Data type | Quantity |
| Template parameter | This proprety request is part of the project of creating an infobox for materials. |
| Domain | Physical and mechanical property of some Materials like Nylon. |
| Allowed values | Any number. Qualifiers : temperature (P2076) (shall be mandatory), under pressure (P2077), determination method (P459). |
| Allowed units | %, ppm |
| Example 1 | nylon 6 (Q109454) → 2,7% determination method (P459) → equilibrium at 50% RH, 9,5% determination method (P459) → Saturation in water / temperature (P2076) → 23°C / under pressure (P2077) → 1 bar |
| Example 2 | nylon 66 (Q7071155) → 2,5..3,1% determination method (P459) → equilibrium at 50% RH, 8..9% determination method (P459) → Saturation in water / temperature (P2076) → 23°C / under pressure (P2077) → 1 bar |
| Source | w:Moisture |
| Planned use | Creating an infobox for materials |
Motivation
This proprety request is part of the project of creating an infobox for materials. The moisture absorbtion is also a necessary qualifier for mechanical propreties of some polymers like Nylon. Exemple of a PA6 datasheet.
Discussion
Comment On some datasheet moisture absorbtion is used as a header for all cases. In others, moisture absorbtion refer to 24H or equilibrium at 50% RH. Water absorbtion is then used for saturation in water. This seems more logical. It could be interesting to have both parameters to display 2 lines on infoboxes. However the risk is that people get confused and use the one instead of the other. -- Thibdx (talk) 12:20, 16 July 2018 (UTC)
Support Dhx1 (talk) 15:52, 16 July 2018 (UTC)- Support Djhé (talk) 06:35, 17 July 2018 (UTC)
- Support David (talk) 14:54, 17 July 2018 (UTC)
- Comment I've asked about similar property here. This two properties seems very much alike, so I think we should consider putting some constraints or using specific qualifiers before creating potential duplicate. Wostr (talk) 00:24, 23 July 2018 (UTC)
- Proposal is to validate Moisture absorbtion and to close Water absorbtion request. "Water absorbtion" will then be added as an alias to Moisture absorbtion (Pxxx). Moisture absorbing materials are generally not used underwater so that it would generally be searched under this label. Thibdx (talk) 21:02, 26 July 2018 (UTC)
@Thibdx, ديفيد عادل وهبة خليل 2, Djhé, Wostr, Dhx1: 
Done: moisture absorption (P5594). − Pintoch (talk) 09:48, 5 August 2018 (UTC)