### How Many Cubic Feet Are in a Ton of Gravel?

2020-3-31 One ton of gravel covers an estimated 80 to 100 square feet when poured 2 inches deep. A cubic yard is 3 feet long, 3 feet wide and 3 feet high. Loose gravel is typically sold by the cubic foot, but knowing how the square feet of the area to be covered helps determine how many tons are needed.

More### How many square feet does a ton of rock cover ...

2021-11-9 Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required. How many square feet will a 40 lb bag of rock cover? 3 sq. How much is a ton of crushed stone?

More### How many cubic feet is a ton of river rock?

2020-2-19 One (1) ton of river rock covers approximately a 50-75 sq. ft. Click to see full answer. Also to know is, how many cubic yards of river rock are in a ton? Multiply the square footage by the depth, such as 60 times 0.167 for about 10 cubic feet. When you divide

More### How big is a ton of gravel? - findanyanswer

2020-4-26 One ton of gravel is approximately 18 cubic feet. One and a half tons of gravel equals 1 cubic yard, which is approximately 27 cubic feet. People also ask, how do I calculate tons of gravel? Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton).

More### How many yards are in a ton of crush and run?

2020-4-26 Most gravel and crushed stone products have similar weights per ton. A general rule of thumb when converting cubic yards of gravel to tons is to multiply the cubic area by 1.4. For your reference, gravel typically weighs 2,800 pounds per cubic yard. In

More### Calculate #57 Limestone Gravel cubic yards / Tons

Type in inches and feet of your project and calculate the estimated amount of Gravel Stone in cubic yards, cubic feet and Tons, that your need for your project. The Density of #57 Limestone Gravel: 2,410 lb/yd³ or 1.21 t/yd³ or 0.8 yd³/t

More### How many bags of crushed rock do I need? – AnswersToAll

2021-3-20 How many bags of crushed rock do I need? In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

More### Gravel Calculator - Calculate how much gravel you need

A tonne of moderately damp gravel typically fills about 0.595 m 3 (cubic meters). It can be more or less dense depending the size of the pebbles, the exact type of source rock, as well as purity. Ton vs tonne, tons vs tonnes. When calculating the gravel weight, make

More### Convert Crushed Stone From Tons to m3: Online Calculator

2019-11-27 Crushed stone 5-10, 5-20 mm: 0.74 cubic meters in one ton. 20-40 millimeters: 0.76 m3. 25-60, 40-70 mm: 0.72 m3. Before making a decision about buying or using crushed stone in construction, you should double-check the variety by

More### Calculate Crushed Coquina Small Shells White cubic yards ...

Calculate Crushed Coquina Small Shells White. Type in inches and feet of your project and calculate the estimated amount of Sand / Screenings in cubic yards, cubic feet and Tons, that your need for your project. The Density of Crushed Coquina Small Shells White: 2,410 lb/yd³ or 1.21 t/yd³ or 0.8 yd³/t.

More### Gravel Calculator

- 1 cubic meter = 1.8365 tons. English - lbs: - 1 cubic feet = 114.823958333 lbs - 1 cubic yard = 3105.0985915 lbs - 1 cubic meter = 4048.789445 lbs. 4. Estimation of the total number of bags required by dividing the total gravel mass required to bags units. Metric - bags: - for bags of 50 kg each it divides the number of tons to 0.05. - for ...

More### How Many Tons Of Gravel Are In A Cubic Yard? - Blurtit

Answer (1 of 7): The number of tons of gravel in a cubic yard depends on the density of the gravel. One ton is 2,000 pounds. Assuming the gravel has an average density of 100 pounds per cubic foot, there are 0.74 cubic yards of gravel in a ton. Divide this by the density to give the number of cubic feet, and then divide this figure by 27 to give the number of cubic yards.

More### How Many Cubic Feet Are in a Ton of Gravel?

2020-3-31 One ton of gravel covers an estimated 80 to 100 square feet when poured 2 inches deep. A cubic yard is 3 feet long, 3 feet wide and 3 feet high. Loose gravel is typically sold by the cubic foot, but knowing how the square feet of the area to be covered helps determine how many tons are needed.

More### Calculate #57 Limestone Gravel cubic yards / Tons

Type in inches and feet of your project and calculate the estimated amount of Gravel Stone in cubic yards, cubic feet and Tons, that your need for your project. The Density of #57 Limestone Gravel: 2,410 lb/yd³ or 1.21 t/yd³ or 0.8 yd³/t

More### How To Convert 1 Ton Of Rock To Cubic Yards Of Rock? -

Anonymous answered. If you are going to buy this from a building materials supplier they use the "formula". Cubic Yards x 1.25 = Weight in tons. They then sell it by the ton. (say $300 per ton) But this is an approximation. If it is one very big river rock it would be a good approximation, but even then it would depend upon the density of the ...

More### Gravel Calculator - Calculate how much gravel you need

A tonne of moderately damp gravel typically fills about 0.595 m 3 (cubic meters). It can be more or less dense depending the size of the pebbles, the exact type of source rock, as well as purity. Ton vs tonne, tons vs tonnes. When calculating the gravel weight, make

More### How many cubic yards in a ton of gravel Cubic yards to ...

2021-11-15 How many cubic yards in a ton of gravel. In United states, in United kingdom and some others part of world most of gravel and crushed stone products have similar weight, gravel and crushed stone typically weighs around 2800 pounds per cubic yard, and 1 ton of gravel weighs is equal to 2000 pounds, number of cubic yards in a ton of gravel = 2000/ 2800 = 0.714 cubic yard, so, there are 0.714 ...

More### Online Conversion - Square feet of rocks to Tons

2005-8-11 Re: Square feet of rocks to Tons. by Robert Fogt on 08/05/05 at 03:55:05. 256 square foot * (3/12) foot = 64 cubic foot. So you need 64 cubic foot of rock. I could not find any data on quartz landscape rock, but crushed stone has a density of 100 pounds/cubic foot. We can use that as

More### Often asked: How Many Yards In A Ton Of Crushed

Crushed concrete costs $11 to $53 per ton, around $16 to $75 per cubic yard, and $1 to $3 per cubic foot, with prices depending on the quantity. How much does crushed concrete weigh per yard? Concrete Weight per Cubic Yard A solid slab of concrete weighs 4,050 pounds per cubic yard.

More### How many yards are in a ton of river rock? - TreeHozz

2020-5-28 How many yards are in a ton of river rock? Multiply the square footage by the depth, such as 60 times 0.167 for about 10 cubic feet. When you divide the cubic feet by 27, you get the number in cubic yards. If you had 120 cubic feet, for example, divide 120 by 27 to get about 4 1/2 cubic yards.

More### Aggregate Calculator - Mulzer Crushed Stone, Inc.

2021-11-16 From driveways to septic system field beds, Mulzer Crushed Stone, Inc. has aggregate products to fit your every need. Use our aggregate calculator to estimate your needs, or contact us at your nearest location. Whether you are a contractor, home

More### How Many Cubic Yards In A Ton? - Blurtit

Answer (1 of 9): A cubic yard is a measure of volume, and a ton is a measure of weight. Hence, asking the question of how many cubic yards there are in a ton is impossible to answer without referring to different substances. Hence, how many cubic yards in a ton depends entirely on what kind of substance you’re talking about, as some materials have an incredibly different density to others ...

More### Gravel Calculator - how much gravel do i need

A cubic yard of usual gravel weighs about 1.4 1.4 1. 4 tons 2830 2830 2 8 3 0 pounds. A square yard of gravel weighs about 74 k g 74kg 7 4 k g or 57 57 5 7 pounds with a depth of 5 5 5 cm or 2 2 2 inch. How many square feet does a ton of rock cover?

More### Tons Bulk Sand Gravel Limestone Material Calculator

Calculate Tons of Compacted Gravel or Limestone. Phone: 847-223-7000 / Fax: 847-223-7067. Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

More### Online Conversion - Square feet of rocks to Tons

2005-8-11 Re: Square feet of rocks to Tons. by Robert Fogt on 08/05/05 at 03:55:05. 256 square foot * (3/12) foot = 64 cubic foot. So you need 64 cubic foot of rock. I could not find any data on quartz landscape rock, but crushed stone has a density of 100 pounds/cubic foot. We can use that as

More### 2021 Gravel Prices Crushed Stone Cost (Per Ton, Yard

Crushed shells cost $2 per square foot, $40 per cubic yard, or $50 per ton on average. Prices depend on the type of shells and location. Crushed clamshells are the cheapest in Florida, Georgia, and Alabama, where it's $10 per ton, $14 per yard, or $0.53 per cubic foot for 1" size washed White Seashells.

More### Crusher Run Tonnage Per Meter Cube - Industris Mining

2021-7-2 how many tonne in a cubic metre of crusher run. Solid rock is estimated at to tons per cubic meter if rock is crushed into uniform sizes the presence of open space between the particles causes the load to be lighter approximately tons per cubic meter mixed

More### How many yards are in a ton of river rock? - TreeHozz

2020-5-28 How many yards are in a ton of river rock? Multiply the square footage by the depth, such as 60 times 0.167 for about 10 cubic feet. When you divide the cubic feet by 27, you get the number in cubic yards. If you had 120 cubic feet, for example, divide 120 by 27 to get about 4 1/2 cubic yards.

More### How To Convert 1 Ton Of Rock To Cubic Yards Of Rock? -

Anonymous answered. If you are going to buy this from a building materials supplier they use the "formula". Cubic Yards x 1.25 = Weight in tons. They then sell it by the ton. (say $300 per ton) But this is an approximation. If it is one very big river rock it would be a good approximation, but even then it would depend upon the density of the ...

More### Gravel Calculator - how much gravel do i need

A cubic yard of usual gravel weighs about 1.4 1.4 1. 4 tons 2830 2830 2 8 3 0 pounds. A square yard of gravel weighs about 74 k g 74kg 7 4 k g or 57 57 5 7 pounds with a depth of 5 5 5 cm or 2 2 2 inch. How many square feet does a ton of rock cover?

More### Tons of Landscaping Rock Calculator Golden Landscaping ...

Cubic Yards; Tons of Rock; ... Cumming Georgia’s Best Landscaping Supply. Use our calculator to determine the number of tons of rock required for your project. Use our calculator to determine the number of tons of rock required for your project. View Our Products. Calculate Tons of Rock

More### How Does it Measure Up Greely Sand Gravel Inc.

Although the back of the truck is 8.5 feet (12 feet wide with the mirrors), all products will slide out 15 to 18 feet wide. Soil: Full tandem load of soil. 18 cubic yards in volume. Measures 21 ft long X 18 ft wide X 4 ft high. Watch the video!

More### Aggregate Calculator - Mulzer Crushed Stone, Inc.

2021-11-16 From driveways to septic system field beds, Mulzer Crushed Stone, Inc. has aggregate products to fit your every need. Use our aggregate calculator to estimate your needs, or contact us at your nearest location. Whether you are a contractor, home

More### Cubic Yard Calculator - Gravel Yardage Calculator -

Enter the dimensions of the area you want to cover in feet, and then enter the depth that you would like to cover that area in inches. Then click the calculate button to calculate the number of cubic yards you will need. For bark or mulch, a nice thick depth would be 3 to 4 inches. If you want to cover an area with gravel, 1 to 2 inches should ...

More### Material Calculator - Big City Crushed Concrete

Main Office 11143 Goodnight Lane Dallas, TX 75229. 972-243-5820 Fax: 972-243-4353 [email protected] Mon - Friday 7:00 am - 5:30 pm Saturday - 7:00 am - Noon

More### How many cubic yards of crushed stone do i need to cover ...

2009-7-7 3 in = .25 ft 220 sq ft x .25 = 55 cubic ft 27 cubic ft = 1 cubic yd 55/27 = 2 cubic yds. "4 inches" is a length. "7676 square feet" is an area. "4 inches by 7676 square feet" describes a volume ...

More